MIDWAY
MACHINE, LLC
9832 HWY.
54 E
WISCONSIN
RAPIDS, WI 54494
CALL:
800-472-4859 &
715-424-2148 FAX: 715-424-2162
Please
follow these instructions carefully:
1.) If
your cylinder that needs to be resleeved or bored has a power valve,
you must remove the power valve and linkage parts. Clean the power
valve and be sure to include the power valve
complete assembly in the shipment so it can be refitted to
the cylinder after resleeving. Midway Machine does not reinstall the
power valve
after resleeving. Midway Machine will charge $15 for any power valve
removal.
2.) Remove manifold, reed valve assemblies, and all covers. DO NOT
include in shipment. Extra charges will apply if Midway Machine removes.
3.) Remove all cylinder studs. We charge $2.00 per stud removal and
$15.00 for repair per stud hole (for thread insert) if studs are broken
during removal. Customer is responsible for obtaining new studs.
4.) Remove all gasket material from top and bottom of cylinder. Extra
charge will apply if WE remove.
5.) Carefully package your cylinder for shipment. It is advised to
double box your cylinder for additional protection. WE are not
responsible for incoming damage to cylinder. We are not responsible
for any parts that are not packaged properly, nor liable for any parts
that are lost due to improper packaging or shipping.
NOTE:
Midway Machine is not responsible for anything left unclaimed for over
60 days.